Tag: flickering lights

Why Are My Lights Flickering?

how to fix flickering lights

While flickering lights are usually a bad sign in horror movies, they’re usually not as bad in the real world. However, flickering lights can most definitely be a nuisance and prolonged exposure can lead to strain on your eyes and even headaches. To prevent this from happening, the pros at Roman Electric are here to tell you a little more about why your lights are flickering and what you can do to fix them!

1. Loose Bulb

Before you panic and call an electrician, make sure the bulb has been tightened properly in the socket. Bulbs tend to loosen overtime, so this could most likely be the reason for the flickering. If you have incandescent bulbs, you might want to wear gloves before you touch them as they radiate heat. Turn off the lights and a wait a few minutes, then carefully tighten the bulb without using excess force.

2. Old Bulb

Sometimes bulbs flicker a lot before they completely wear out and stop working. If tightening the bulb does not work, you might want to replace the old bulb with a new one. If the flickering persists after this, you might be dealing with a different problem.

3. Type of Switch or Bulb

Sometimes the problem could be with the type of bulb or switch you have. Often, homeowners will replace the bulbs with new ones or different types without replacing the switch. So, you could potentially have a standard CFL or incandescent bulb hooked up to an older dimmer switch, which could be causing problems such as flickering. To fix this problem, you might want to change the switch—if you have experience dealing with electrical problems, you can do this on your own. However, there is no harm in calling an electrician either, as they can safely do the job for you.

4. Fluctuating Voltage

You might have noticed that sometimes, turning on a heavier appliance with high wattage can cause the lights to flicker or dim for a second. If this flickering is persistent long after you have turned on the appliance, you might be dealing with a voltage fluctuation problem. Your home’s electricity supply should be between 115 and 125 volts. By using a device called a voltmeter, you can check your home’s voltage supply—if the number is higher than 125 volts, you have figured out the reason for the flickering. To fix this, consider getting 130-volt bulbs and consult an electrician.

5. Loose Wiring

Check your fixtures, bulbs and outlets for any loose or worn-out wiring. If you notice any wires are loose or old, call an electrician immediately. Loose wiring can not only cause flickering lights but electric fires, which are far more dangerous to you and your family.

Fix Flickering Lights with Roman Electric!

We hope this guide on how you can fix flickering lights was helpful. If you want to learn more about how you can fix the lights, fixtures and wiring in your home, get in touch with the pros at Roman Electric! Call us today at 414-369-3798 or schedule an appointment online!